Elite EM 428 4" Woofer
A unique 4" unit that incorporates a damped polymer composite cone, 2-1/8" Hexatech™ aluminum voice coil, neodymium magnet system, high power handling, and a smooth response up to 5kHz.
E-mail
info@diy-audio.eu
Kezdőlap
Subcategories
24 termék található.
Aktív szűrők
Elite EW 428 4" Woofer
Morel Elite Series 4" woofers feature large diameter voice coils, open yet strong frames, advanced composite cones, and carefully engineered magnetic circuits. Frequency response is extremely flat and overall definition is superb.
SB12NRX25-8 4'' Midrange...
The SB Acoustics SB12NRX25-8 4" Midwoofer is an excellent SB Acoustics Ferrite magnet midrange/midwoofer, featuring a high efficiency low damping rubber surround. Fitted with a proprietary composition paper cone, 1" voice coil.
SB12PFC25-4-COAX 4" Coaxial...
The SB Acoustics SB12PFC25-4-COAX is composed by a vented reinforced plastic chassis and a proprietary cone material with natural made in-house fibers. The soft low damping rubber surround allows an improved transient response.
SB15SFCR39-8 5x8" Paper...
SB Acoustics 5x8" Racetrack Woofer - 39mm VC, SB15SFCR39-8
SB20PFC30-8 8" Paper Cone...
The SB Acoustics SB20PFC30-8 is an 8" papyrus fiber paper cone woofer with a great value for its build quality and performance. Its components make it a good choice for many different enclosure types.
SB20PFCR30-4 8" Paper Cone...
8" Paper cone full-range woofer featuring vented reinforced plastic chassis and soft low damping rubber surround for improved transient response.
SB23MFCL45-4...
A compact high quality subwoofer. That is optimized for smaller compact enclosures.
SB23NACS45-4 8" Aluminum...
The SB Acoustics SB23NACS45-4 features a soft low damping rubber surround for improved transient response and a geometrically reinforced aluminum cone for improved break-up control. Shorting ring in motor system for reduced distortion and vented pole piec
SB23NACS45-8 8" Aluminum...
The SB Acoustics SB23NACS45-8 features a soft low damping rubber surround for improved transient response and a geometrically reinforced aluminum cone for improved break-up control. Shorting ring in motor system for reduced distortion and vented pole piec
SB23NRXS45-4 8" Woofer
The SB Acoustics SB23NRXS45-4 woofer has a proprietary composition paper cone made in-house and a rigid cast frame with ventilated spider and large vented pole piece. A low damping rubber surround assures decent midrange reproduction. A shorting ring is u
SB23NRXS45-8 8" Woofer
The SB23NRXS45-8 woofer has a proprietary composition paper cone made in-house and a rigid cast frame with ventilated spider and large vented pole piece. A low damping rubber surround assures decent midrange reproduction. A shorting ring is used in the mo
SB29NRX-00 10" Passive...
This driver is built similarly to the active woofer and is a good match to the SB29SWNRX-S75 10" subwoofer. In 0.75 to 1.0 cubic foot with that woofer one has an F3 of about 35Hz. It also mates well with the SB29NRX75-6 10" woofer.
SB34NRX-00 12" Passive...
The SB Acoustics SB34NRX-00 passive radiator is a good match to the SB Acoustics woofer SB34SWNRX-S75. In 2.0 to 2.5 cubic foot box this combo will get down to 30Hz. Adding a plate amplifier with a low frequency boost would push the F3 even lower.
SB34NRX75-16 12" Woofer 16 ohm
This new 16 ohm 12″ woofer from SB Acoustic features a low distortion motor system, paper cone with rubber surround, cast Aluminum frame and 75mm voice coil. The woofer would make a fine low frequency driver for a premium 3-way system, or put two in paral
SB34NRXL75-8 12" Woofer
The SB34NRXL75-8 12" woofer features a proprietary composition paper cone with a special coating. The rubber surround has been carefully chosen to properly dampen the cone movement. The open structure cast frame has been specially engineered for minimum r
SW26DAC-00 10" Passive...
SB Acoustics has made its new 10" passive radiator, the SW26DAC-00 to match their already active SW26DAC76 woofers. Simulating them in BassBox Pro produces some very good looking results.
SW26DAC76-4 10" Subwoofer 4...
The SB Acoustics SW26DAC76-4 10 inch 4 ohm aluminum shallow subwoofer. Can be used with very shallow enclosure’s.
SW26DAC76-8 10" Subwoofer 8...
The SB Acoustics SW26DAC76-8 10 inch 8 ohm aluminum shallow subwoofer. Can be used with very shallow enclosure’s
SW26DBAC-00 10'' Passive...
The SB Acoustics 10" passive radiator SW26DBAC-00 produces some very good results thanks to its main components: dual rigid aluminum cone structure and cast aluminum chassis that allows optimum strength.
SW26DBAC76-4 10" Aluminium...
The SB Acoustics SW26DBAC76-4 10 inch 4 ohm aluminum shallow subwoofer. Can be used with very shallow enclosure’s
SW26DBAC76-8 10’’ Aluminum...
The SB Acoustics SW26DBAC76-8 10 inch 8 ohm aluminum shallow subwoofer. Can be used with very shallow enclosure’s
TiCW 1058Ft Titanium Series...
To create their Titanium Ultimate high fidelity 10" subwoofer, Morel began with an extra-large, 5.1" diameter, Hexatech™ aluminum voice coil wound on a vented titanium former.
TiCW 1258Ft Titanium Series...
To create their Titanium Ultimate high fidelity 12" subwoofer, Morel began with an extra-large, 5.1" diameter, Hexatech™ aluminum voice coil wound on a vented titanium former. Moving this beast requires huge amounts of magnetic force, so to do so Morel us
