Classic Advanced CAW 638 6"...
This woofer features an aerodynamic Uniflow™ open chassis, large diameter spider, reinforced ferrite magnets resulting in higher power handling, and low resonance frequency and Qts points.
E-mail
info@diy-audio.eu
Hangszórók
Subcategories
32 termék található.
Aktív szűrők
Elite Coppersleeve ECW 638...
Morel Elite Coppersleeve Series woofers feature large diameter voice coils, open yet strong frames, advanced composite cones, and carefully engineered magnetic circuits.
Elite EW 638 6" Woofer
Morel Elite Series 6" woofers feature large diameter voice coils, open yet strong frames, advanced composite cones, and carefully engineered magnetic circuits.
NE315W-04 12" Subwoofer
Tymphany's NE315W-04 12" neodymium subwoofer features a sophisticated, aerodynamic cast aluminum basket that also serves as a heat sink. The driver's Pentacone diaphragm technology and high-strength neodymium magnet provide incredibly deep, clean bass fun
Satori MW16PNW-4 6" White...
Under the Satori brand are two new 5” and 6.5” midrange drivers, MR13P-4 and MW16PNW-4, respectively, featuring black or natural white cones using Egyptian Papyrus fibers produced in house with a proprietary method, combined with soft low damping rubber s
Satori MW16PNW-8 6" White...
Under the Satori brand are two new 5” and 6.5” midrange drivers, MR13P-4 and MW16PNW-4, respectively, featuring black or natural white cones using Egyptian Papyrus fibers produced in house with a proprietary method, combined with soft low damping rubber s
Satori MW19P-4 7.5"...
The SB Acoustics Satori MW19P-4 Midwoofer is a State of The Art Neodymium magnet 7.5" 4 ohm midwoofer, featuring a proprietary Papyrus Paper cone, a high efficiency soft low damping optimum response rubber surround, BiMax spider, and a glass fiber former
Satori MW19P-8 7.5"...
The SB Acoustics Satori MW19P-8 Midwoofer is a State of The Art Neodymium magnet 7.5" 8 ohm midwoofer, featuring a proprietary Papyrus Paper cone, a high efficiency soft low damping optimum response rubber surround, BiMax spider, and a glass fiber former
Satori MW19TX-4 7.5″...
TeXtreme - Combining ultralightweight, high stiffness and controlled break-up behaviour.
SB17CAC35-4 6" Ceramic Woofer
SB Ceramic cones consist of an aluminum/ceramic dual layer cone. Ceramic provides a very hard and robust surface with improved sonic properties and cosmetic appearance.
SB17CRC35-4 6" Woven Carbon...
Rohacellﾮ/Carbon fibre sandwich cone for optimized stiffness/damping ratio - Vented cast aluminum chassis for optimum strength and low compression - Low damping rubber surround for improved transient response - Non-conducting fibre glass voice coil former
SB17CRC35-8 6" Woven Carbon...
Rohacell®/Carbon fibre sandwich cone for optimized stiffness/damping ratio, vented cast aluminum chassis for optimum strength and low compression, low damping rubber surround for improved transient response. Non-conducting fibre glass voice coil former fo
SB17MFC35-4 6" Poly Cone...
In-house made mineral filled PP-cone. Low damping rubber surround for improved transient response. Open structure cast frame for reduced reflections and compression. Aluminum alloy for light weight, non-magnetic and extra rigidity. Shorting copper cap on
SB17MFC35-8 6" Poly Cone...
In-house made mineral filled PP-cone. Low damping rubber surround for improved transient response. Open structure cast frame for reduced reflections and compression. Aluminum alloy for light weight, non-magnetic and extra rigidity. Shorting copper cap on
SB17NAC35-4 6'' Aluminum...
The SB Acoustics SB17NAC35-4 features a vented cast aluminum chassis for optimum strength and low compression and a geometrically reinforced aluminum cone for optimum piston operation and reduced break-up.
SB17NAC35-8 6'' Aluminum...
The SB Acoustics SB17NAC35-8 features a vented cast aluminum chassis for optimum strength and low compression. Its geometrically reinforced aluminum cone allows an optimum piston operation and reduced break-up.
SB17NBAC35-8 6" Black...
The SB Acoustics SB17NBAC35-8 features a vented cast aluminum chassis for optimum strength and low compression and a geometrically reinforced aluminum cone for optimum piston operation and reduced break-up.
SB34NRX-00 12" Passive...
The SB Acoustics SB34NRX-00 passive radiator is a good match to the SB Acoustics woofer SB34SWNRX-S75. In 2.0 to 2.5 cubic foot box this combo will get down to 30Hz. Adding a plate amplifier with a low frequency boost would push the F3 even lower.
SB34NRX75-16 12" Woofer 16 ohm
This new 16 ohm 12″ woofer from SB Acoustic features a low distortion motor system, paper cone with rubber surround, cast Aluminum frame and 75mm voice coil. The woofer would make a fine low frequency driver for a premium 3-way system, or put two in paral
SB34NRXL75-8 12" Woofer
The SB34NRXL75-8 12" woofer features a proprietary composition paper cone with a special coating. The rubber surround has been carefully chosen to properly dampen the cone movement. The open structure cast frame has been specially engineered for minimum r
SLS-P830669 12" Paper Cone...
The Peerless SLS Series combines high quality performance with an affordable design.
Supreme SCM 634 6" Woofer
Morel's SCM634 Supreme Coppersleeve Midrange neodymium/ferrite hybrid motor structure is combined with a cutting-edge cast alloy chassis for maximum performance.
Supreme SCW 636 6" Woofer
The Morel Supreme Series SCW636 woofer features a 16 mm long, 3" diameter Hexatech voice coil that provides plenty of deep bass punch, and a copper-covered pole piece design reduces inductance.
TiCW 1258Ft Titanium Series...
To create their Titanium Ultimate high fidelity 12" subwoofer, Morel began with an extra-large, 5.1" diameter, Hexatech™ aluminum voice coil wound on a vented titanium former. Moving this beast requires huge amounts of magnetic force, so to do so Morel us
