There are 17 products.
Active filters
The MR16P-4 is built on a cosmetically attractive six-spoke frame that has a minimal reflective footprint behind the cone to reduce reflections and a completely open area beneath the spider mounting shelf for enhanced cooling, both highly desirable attrib
The SB Acoustics Satori MR16P-8 Midwoofer is a State of The Art Neodymium magnet 6.5" 8 ohm midrange, featuring a proprietary Papyrus Paper cone, a soft low damping optimum response rubber surround, BiMax spider, and a glass fiber former with copper sleev
Under the Satori brand are two new 5” and 6.5” midrange drivers, MR13P-4 and MW16PNW-4, respectively, featuring black or natural white cones using Egyptian Papyrus fibers produced in house with a proprietary method, combined with soft low damping rubber s
The SB Acoustics MW16TX-4/TeXtreme uses unique materials and an aerodynamic aluminum chassis to create an efficient and accurate speaker with good bass response.
The Satori range was founded to separate more expensive projects from a wider range of more affordable – but still high-end – SB Acoustics products. As we get more experience, new materials, better simulation tools, we believe in benefiting the customer w
The Satori range was founded to separate more expensive projects from a wider range of more affordable – but still high-end – SB Acoustics products. As we get more experience, new materials, better simulation tools, we believe in benefiting the customer w
This driver is built similarly to the active woofer and is a good match to the SB29SWNRX-S75 10" subwoofer. In 0.75 to 1.0 cubic foot with that woofer one has an F3 of about 35Hz. It also mates well with the SB29NRX75-6 10" woofer.
The SB Acoustics SB34NRX-00 passive radiator is a good match to the SB Acoustics woofer SB34SWNRX-S75. In 2.0 to 2.5 cubic foot box this combo will get down to 30Hz. Adding a plate amplifier with a low frequency boost would push the F3 even lower.
This new 16 ohm 12″ woofer from SB Acoustic features a low distortion motor system, paper cone with rubber surround, cast Aluminum frame and 75mm voice coil. The woofer would make a fine low frequency driver for a premium 3-way system, or put two in paral
The SB Acoustics SB34NRX75-6 12" woofer uses a large 3" voice coil on a cast aluminum chassis. Hard Paper proprietary cone materials made in-house for consistency. Low damping SBR rubber surround with high exertion and resilience.
The SB34NRXL75-8 12" woofer features a proprietary composition paper cone with a special coating. The rubber surround has been carefully chosen to properly dampen the cone movement. The open structure cast frame has been specially engineered for minimum r
SB Acoustics has made its new 10" passive radiator, the SW26DAC-00 to match their already active SW26DAC76 woofers. Simulating them in BassBox Pro produces some very good looking results.
The SB Acoustics SW26DAC76-4 10 inch 4 ohm aluminum shallow subwoofer. Can be used with very shallow enclosure’s.
The SB Acoustics SW26DAC76-8 10 inch 8 ohm aluminum shallow subwoofer. Can be used with very shallow enclosure’s
The SB Acoustics 10" passive radiator SW26DBAC-00 produces some very good results thanks to its main components: dual rigid aluminum cone structure and cast aluminum chassis that allows optimum strength.
The SB Acoustics SW26DBAC76-4 10 inch 4 ohm aluminum shallow subwoofer. Can be used with very shallow enclosure’s
The SB Acoustics SW26DBAC76-8 10 inch 8 ohm aluminum shallow subwoofer. Can be used with very shallow enclosure’s
