Revelator 18W/8531G00 7" Woofer

The Scan-speak 18W/8531G-00 is a 7" Revelator mid/woofer. It features a non-resonant cone and dust cap structure, dynamic linear suspension, SD-1 magnet system, “Grasshopper" cast chassis with maximized air flow and resonance terminating mounting system.

214,95 €
Adóval együtt
Mennyiség

Payment
discover visa googlewallet paypal mastercard americanexpress

Highlights

  • Patented Symmetrical Drive Motor Design
  • Low-Loss linear suspension
  • Die cast Alu Chassis vented below spider
  • Sliced Cone (Controls Cone Breakups)
  • Low Damping SBR Rubber Surround
  • Large Ferrite Magnet System

 

Product details

Scan-Speak Revelator 18W/8531G00 7" Woofer

 

The Scan-speak 18W/8531G-00 is a 7" Revelator mid/woofer. It features a non-resonant cone and dust cap structure, dynamic linear suspension, SD-1 magnet system, “Grasshopper" cast chassis with maximized air flow and resonance terminating mounting system. Less resonance in all structures, lower compression and higher linearity, faster termination of excess energy and higher sound pressure capability. The 18W/8531G should have an F3 of about 55Hz sealed and can get down to 33Hz vented.

SI18W8531G00

Adatlap

Impedance
8 Ohm
Sensitivity
87 dB 2.83V/1m
Resonance frequency (fs)
28 Hz
DC resistance (Re)
5.8 ohms
Mechanical Q (Qms)
5.10
Electrical Q at Fs (Qes)
0.39
Total Q factor (Qts)
0.36
Speaker diameter
7"
Voice coil inductance (L)
0.35 mH
Effective mechanical mass incl air load (mms)
17.5g
Effective piston radiating area (Sd)
150 cm2
Force factor (BL)
6.8 Tm
Equivalent volume of compliance (Vas)
2.05 ft.³