RS180P-4 7" Reference Paper...
Dayton Audio Reference Series paper cone drivers combine class-leading low distortion performance with super smooth frequency response due to the use of a proprietary cone blend.
Email Us
info@diy-audio.eu
Subcategories
There are 48 products.
Active filters
RS75-4 3" Reference...
Incorporating a low-distortion motor system with a copper ring, a copper cap, and an aluminum phase plug, the RS75-4 can outperform "boutique" drivers that cost several times the price.
Satori MR13P-4 5" Egyptian...
The MR13P-4 is built on a cosmetically attractive six-spoke frame that has a minimal reflective footprint behind the cone to reduce reflections and a completely open area beneath the spider mounting shelf for enhanced cooling— both highly desirable attrib
Satori MR13PNW-4 5" White...
The Satori range was founded to separate more expensive projects from a wider range of more affordable - but still high-end - SB Acoustics products. Under the Satori brand are two new 5” and 6.5” midrange drivers, MR13P-4 and MW16PNW-4, respectively, fea
Satori MR16P-4 6.5" Midrange
The MR16P-4 is built on a cosmetically attractive six-spoke frame that has a minimal reflective footprint behind the cone to reduce reflections and a completely open area beneath the spider mounting shelf for enhanced cooling, both highly desirable attrib
Satori MW13PNW-4 5" White...
Under the Satori brand are two new 5” and 6.5” midrange drivers, MR13P-4 and MW16PNW-4, respectively, featuring black or natural white cones using Egyptian Papyrus fibers produced in house with a proprietary method, combined with soft low damping rubber s
Satori MW16P-4 6" Egyptian...
The MW16P-4 is a 4 ohm mid-woofer from the SB Acoustics Satori series. This driver has very nice looks and building quality. The small but yet powerful neodymium magnet together with the shape of the chassis contributes to an optimal airflow behavior.
Satori MW16PNW-4 6" White...
Under the Satori brand are two new 5” and 6.5” midrange drivers, MR13P-4 and MW16PNW-4, respectively, featuring black or natural white cones using Egyptian Papyrus fibers produced in house with a proprietary method, combined with soft low damping rubber s
Satori MW16TX-4 6,5"...
The SB Acoustics MW16TX-4/TeXtreme uses unique materials and an aerodynamic aluminum chassis to create an efficient and accurate speaker with good bass response.
SB15CAC30-4 5" Ceramic Woofer
SB Ceramic cones consist of an aluminum/ceramic dual layer cone. Ceramic provides a very hard and robust surface with improved sonic properties and cosmetic appearance.
SB15NAC30-4 5'' Mid-Woofer
SB Ceramic cones consist of an aluminum/ceramic dual layer cone. Ceramic provides a very hard and robust surface with improved sonic properties and cosmetic appearance.
SB16PFC25-4-COAX 6" Paper...
The SB Acoustics SB16PFC25-4-COAX is composed by a vented reinforced plastic chassis and a proprietary cone material with natural made in-house fibers. The soft low damping rubber surround allows an improved transient response.
SB17CAC35-4 6" Ceramic Woofer
SB Ceramic cones consist of an aluminum/ceramic dual layer cone. Ceramic provides a very hard and robust surface with improved sonic properties and cosmetic appearance.
SB17CRC35-4 6" Woven Carbon...
Rohacellﾮ/Carbon fibre sandwich cone for optimized stiffness/damping ratio - Vented cast aluminum chassis for optimum strength and low compression - Low damping rubber surround for improved transient response - Non-conducting fibre glass voice coil former
SB17MFC35-4 6" Poly Cone...
In-house made mineral filled PP-cone. Low damping rubber surround for improved transient response. Open structure cast frame for reduced reflections and compression. Aluminum alloy for light weight, non-magnetic and extra rigidity. Shorting copper cap on
SB17NAC35-4 6'' Aluminum...
The SB Acoustics SB17NAC35-4 features a vented cast aluminum chassis for optimum strength and low compression and a geometrically reinforced aluminum cone for optimum piston operation and reduced break-up.
SB17NBAC35-4 6" Black...
The SB Acoustics SB17NBAC35-4 features a vented cast aluminum chassis for optimum strength and low compression, a geometrically reinforced aluminum cone for optimum piston operation and reduced break-up.
SB17NRXC35-4 6" Midrange...
Newly developed Norecx non-resonant poly-coated papyrus fiber cone. Low damping SBR rubber surround with high exertion and resilience. Open structure cast frame for reduced reflections and compression. Aluminum alloy for light weight, non-magnetic and ext
SDS-135F25CP02-04 5-1/4"...
The SDS-135F25CP02-04 5-1/4" subwoofer from Peerless is perfect for adding powerful bass performance to portable speaker designs or small 2.1 systems. This high excursion driver is designed to excel in small enclosures.
SLS-P830945 5-1/4" Paper...
With a large roll surround, high excursion, and low Fs for its size, the Peerless SLS-P380945 5-1/4" subwoofer is ideal for use in extremely compact subwoofer designs, portable 2.1 systems, or even as a woofer in small 3-way systems.
Supreme SCM 634 6" Woofer
Morel's SCM634 Supreme Coppersleeve Midrange neodymium/ferrite hybrid motor structure is combined with a cutting-edge cast alloy chassis for maximum performance.
TiCW 634Nd Titanium Series...
The 6" TiCW 634Nd features a Coppersleeve Neolin motor and a titanium bobbin for ultra-quick transient response and a Uniflow chassis for reduced power compression.
TiW 634Nd Titanium Series...
The 6" TiW 634Nd features a 3" Hexatech voice coil on a titanium bobbin for ultra-quick transient response and a Uniflow chassis for reduced power compression.
TSCM 634 Titanium Supreme...
The 6" TSCM 634 features an underhung 3" Hexatech voice coil on a titanium bobbin for ultra-quick transient response, a Uniflow chassis for reduced power compression, and a copper-sleeved pole piece for reduced inductance.
