Best Sellers
Jantzen Audio Silver Z-Cap
1ET400A 1x425W Eigentakt...
500A 500W Pro Amplifier Module
Subcategories
There are 79 products.
Satori MW16PNW-4 6" White...
Under the Satori brand are two new 5” and 6.5” midrange drivers, MR13P-4 and MW16PNW-4, respectively, featuring black or natural white cones using Egyptian Papyrus fibers produced in house with a proprietary method, combined with soft low damping rubber s
Satori MW16PNW-8 6" White...
Under the Satori brand are two new 5” and 6.5” midrange drivers, MR13P-4 and MW16PNW-4, respectively, featuring black or natural white cones using Egyptian Papyrus fibers produced in house with a proprietary method, combined with soft low damping rubber s
SB16PFC25-4-COAX 6" Paper...
The SB Acoustics SB16PFC25-4-COAX is composed by a vented reinforced plastic chassis and a proprietary cone material with natural made in-house fibers. The soft low damping rubber surround allows an improved transient response.
SB17CAC35-4 6" Ceramic Woofer
SB Ceramic cones consist of an aluminum/ceramic dual layer cone. Ceramic provides a very hard and robust surface with improved sonic properties and cosmetic appearance.
SB17CAC35-8 6" Ceramic Woofer
SB Ceramic cones consist of an aluminum/ceramic dual layer cone. Ceramic provides a very hard and robust surface with improved sonic properties and cosmetic appearance.
SB17CRC35-4 6" Woven Carbon...
Rohacellᆴ/Carbon fibre sandwich cone for optimized stiffness/damping ratio - Vented cast aluminum chassis for optimum strength and low compression - Low damping rubber surround for improved transient response - Non-conducting fibre glass voice coil former
SB17NAC35-4 6'' Aluminum...
The SB Acoustics SB17NAC35-4 features a vented cast aluminum chassis for optimum strength and low compression and a geometrically reinforced aluminum cone for optimum piston operation and reduced break-up.
SB17NAC35-8 6'' Aluminum...
The SB Acoustics SB17NAC35-8 features a vented cast aluminum chassis for optimum strength and low compression. Its geometrically reinforced aluminum cone allows an optimum piston operation and reduced break-up.
SB17NBAC35-4 6" Black...
The SB Acoustics SB17NBAC35-4 features a vented cast aluminum chassis for optimum strength and low compression, a geometrically reinforced aluminum cone for optimum piston operation and reduced break-up.
SB17NRXC35-8 6" Midrange...
The goal of SB Acoustics with their NRX series of performance drivers has been to design a simple, yet optimized speaker driver at a competitive price to achieve a high performance to cost ratio for their customers who appreciate premium quality audio. To
SB29NRX-00 10" Passive...
This driver is built similarly to the active woofer and is a good match to the SB29SWNRX-S75 10" subwoofer. In 0.75 to 1.0 cubic foot with that woofer one has an F3 of about 35Hz. It also mates well with the SB29NRX75-6 10" woofer.
SB29NRX75-6 10" Woofer
The SB29NRX75-6 10" woofer features a proprietary composition paper cone with a special coating. The rubber surround has been carefully chosen to properly dampen the cone movement. The open structure cast frame has been specially engineered for minimum re
SD270A-88 10" DVC Subwoofer
The Dayton Audio SD270A-88 10" subwoofer speaker is one of the best bang-for-the-buck low frequency drivers available today.
SLS-P830668 10" Paper Cone...
The Peerless SLS Series combines high quality performance with an affordable design.
Supreme SCM 634 6" Woofer
Morel's SCM634 Supreme Coppersleeve Midrange neodymium/ferrite hybrid motor structure is combined with a cutting-edge cast alloy chassis for maximum performance.
Supreme SCW 636 6" Woofer
The Morel Supreme Series SCW636 woofer features a 16 mm long, 3" diameter Hexatech voice coil that provides plenty of deep bass punch, and a copper-covered pole piece design reduces inductance.
SW26DAC-00 10" Passive...
SB Acoustics has made its new 10" passive radiator, the SW26DAC-00 to match their already active SW26DAC76 woofers. Simulating them in BassBox Pro produces some very good looking results.
SW26DAC76-4 10" Subwoofer 4...
The SB Acoustics SW26DAC76-4 10 inch 4 ohm aluminum shallow subwoofer. Can be used with very shallow enclosure’s.
SW26DAC76-8 10" Subwoofer 8...
The SB Acoustics SW26DAC76-8 10 inch 8 ohm aluminum shallow subwoofer. Can be used with very shallow enclosure’s
SW26DBAC-00 10'' Passive...
The SB Acoustics 10" passive radiator SW26DBAC-00 produces some very good results thanks to its main components: dual rigid aluminum cone structure and cast aluminum chassis that allows optimum strength.
SW26DBAC76-4 10" Aluminium...
The SB Acoustics SW26DBAC76-4 10 inch 4 ohm aluminum shallow subwoofer. Can be used with very shallow enclosure’s
SW26DBAC76-8 10" Aluminum...
The SB Acoustics SW26DBAC76-8 10 inch 8 ohm aluminum shallow subwoofer. Can be used with very shallow enclosure’s
TiCW 1058Ft Titanium Series...
To create their Titanium Ultimate high fidelity 10" subwoofer, Morel began with an extra-large, 5.1" diameter, Hexatech™ aluminum voice coil wound on a vented titanium former.
TiCW 634Nd Titanium Series...
The 6" TiCW 634Nd features a Coppersleeve Neolin motor and a titanium bobbin for ultra-quick transient response and a Uniflow chassis for reduced power compression.