Best Sellers
Speaker drivers
Subcategories
There are 19 products.
Active filters
Elite EM 1308 2" Mid-Dome
The Elite EM 1308 2" dome midrange is based on the MDM 55's unique qualities. It features IDR™ (Improved Dispersion Recess), an improved neodymium magnet, aluminum faceplate, hand coated Accuflex™ soft dome, Hexatech aluminum voice coil, rear chamber load
NE123W-08 4" Full Range Woofer
The high fidelity/low distortion Tymphany NE123W-08 4" Neodymium Woofer utilizes advanced design and measurement technologies in combination with carefully selected construction materials.
NE315W-04 12" Subwoofer
Tymphany's NE315W-04 12" neodymium subwoofer features a sophisticated, aerodynamic cast aluminum basket that also serves as a heat sink. The driver's Pentacone diaphragm technology and high-strength neodymium magnet provide incredibly deep, clean bass fun
NE65W-04 2" Full Range Woofer
Tymphany's NE Series full-range drivers feature an innovative sculpted, open cast aluminum basket design that minimizes internal acoustic reflections and acts as the neodymium motor's heatsink.
Prestige MCA12RC - H1304...
Manually coated paper cone and mechanically matching natural rubber surround result in an unusually smooth midrange response. 1” high temperature voice coil is wound on an aluminum voice coil former to ensure a very high power handling capacity.
Prestige MU10RB-SL -...
The MU10RB is a 4” midrange driver offering an extraordinary performance and sound clarity. New Curv cone, a woven polypropylene with excellent internal damping together with perfectly matched moving parts gives a smooth, extended frequency response.
Satori MW19P-8 7.5"...
The SB Acoustics Satori MW19P-8 Midwoofer is a State of The Art Neodymium magnet 7.5" 8 ohm midwoofer, featuring a proprietary Papyrus Paper cone, a high efficiency soft low damping optimum response rubber surround, BiMax spider, and a glass fiber former
Satori MW19TX-4 7.5″...
TeXtreme - Combining ultralightweight, high stiffness and controlled break-up behaviour.
SB12CACS25-4 4" Ceramic Woofer
Ceramic cones offer smoothness and harmonic richness unavailable from conventional paper cone material. Ceramic materials also offer significantly higher stiffness numbers and slightly better internal losses than typical metals such as titanium or aluminu
SB12CACS25-8 4" Ceramic Woofer
Ceramic cones offer smoothness and harmonic richness unavailable from conventional paper cone material. Ceramic materials also offer significantly higher stiffness numbers and slightly better internal losses than typical metals such as titanium or aluminu
SB12MNRX25-4 4" Midrange...
SB Acoustics Midrange Woofer is an excellent SB Acoustics Ferrite magnet midrange/midwoofer, featuring a high efficiency foam surround.
SB12NRX25-4 4" Midrange Woofer
The SB Acoustics SB12NRX25-4 4" Midwoofer is an excellent SB Acoustics Ferrite magnet midrange/midwoofer, featuring a high efficiency low damping rubber surround.
SB12NRX25-8 4'' Midrange...
The SB Acoustics SB12NRX25-8 4" Midwoofer is an excellent SB Acoustics Ferrite magnet midrange/midwoofer, featuring a high efficiency low damping rubber surround. Fitted with a proprietary composition paper cone, 1" voice coil.
SB12PFC25-4-COAX 4" Coaxial...
The SB Acoustics SB12PFC25-4-COAX is composed by a vented reinforced plastic chassis and a proprietary cone material with natural made in-house fibers. The soft low damping rubber surround allows an improved transient response.
SB34NRX-00 12" Passive...
The SB Acoustics SB34NRX-00 passive radiator is a good match to the SB Acoustics woofer SB34SWNRX-S75. In 2.0 to 2.5 cubic foot box this combo will get down to 30Hz. Adding a plate amplifier with a low frequency boost would push the F3 even lower.
SB34NRX75-16 12" Woofer 16 ohm
This new 16 ohm 12″ woofer from SB Acoustic features a low distortion motor system, paper cone with rubber surround, cast Aluminum frame and 75mm voice coil. The woofer would make a fine low frequency driver for a premium 3-way system, or put two in paral
SB34NRX75-6 12" Woofer
The SB Acoustics SB34NRX75-6 12" woofer uses a large 3" voice coil on a cast aluminum chassis. Hard Paper proprietary cone materials made in-house for consistency. Low damping SBR rubber surround with high exertion and resilience.
SB34NRXL75-8 12" Woofer
The SB34NRXL75-8 12" woofer features a proprietary composition paper cone with a special coating. The rubber surround has been carefully chosen to properly dampen the cone movement. The open structure cast frame has been specially engineered for minimum r
SLS-P830669 12" Paper Cone...
The Peerless SLS Series combines high quality performance with an affordable design.